Super Thin Turbo Tile Cut Diamond Saw Blade for Ceramic

Hot pressed cutting blade designed for angle grinders   particularly for cutting hard material such as porcelain, hard ceramics and   quartz. Super fast cutting. Extra long life. Blade cuts extremely cool.     Thin turbo-mesh rim and core for fast cutting and minimal chipping.     Ideal for cutting extra hard ceramics, porcelain and other hard/dense   materials.     Reinforced inner core prevents flexing and provides straight cuts.
Diameter	Segment Width	Segment Height	Arbor Hole
(inch/mm)	(mm)	(mm)	(mm)
4” / 100	1.2	10	20/22.23
4 3/8” / 105	1.2	10	20/22.23
4.5” / 115	1.4	10	20/22.23
5” / 125	1.4	10	20/22.23
7” / 180	1.6	10	20/22.23
9”/ 230	1.8	10	20/22.23

Applications

This hot pressed diamond blade is built for angle grinders and for hard, dense materials that ordinary blades struggle to cut cleanly.

• Hard ceramics and porcelain tile, including dense and vitrified types
• Porcelain slabs and large-format tile where chipping must be kept to a minimum
• Quartz and other hard, dense surfacing materials
• Trim, edge and finish cuts on brittle ceramic where a clean cut line matters
• Fast cutting work on hard materials that would quickly wear out a standard blade
• Straight cutting jobs that call for a rigid blade rather than one that flexes in the cut

FAQ

What machine is this blade designed to be used on?

It is a hot pressed cutting blade designed for angle grinders. It is intended for cutting work on hard, dense materials rather than for general purpose cutting.

Which materials is this blade suitable for?

It is particularly suited to hard material such as porcelain, hard ceramics and quartz. It is also ideal for extra hard ceramics, porcelain and other hard or dense materials. It is a diamond blade for brittle, hard surfacing materials and is not intended for cutting iron, steel or other metals.

Why is the rim thin and turbo-mesh?

The thin turbo-mesh rim and core are designed for fast cutting with minimal chipping. This combination helps the blade move through hard material quickly while limiting damage along the cut edge.

Does the blade run hot during cutting?

The blade is designed to cut extremely cool, which helps support the extra long life claimed for this hot pressed blade, even when it is used continuously on hard ceramics and porcelain.

Will the blade stay straight in the cut?

Yes. A reinforced inner core prevents flexing, which helps the blade hold a straight cut line instead of wandering. This makes it easier to achieve accurate, clean cuts on hard tile and ceramic surfaces.