Ceramic Tile Cutting Turbo Diamond Circular Saw Blade Dekton Marble

Hot pressed cutting blade designed for angle grinders   particularly for cutting hard material such as porcelain, hard ceramics and   quartz. Super fast cutting. Extra long life. Blade cuts extremely cool.     Thin turbo-mesh rim and core for fast cutting and minimal chipping.     Ideal for cutting extra hard ceramics, porcelain and other hard/dense   materials.     Reinforced inner core prevents flexing and provides straight cuts.
Diameter	Segment Width	Segment Height	Arbor Hole
(inch/mm)	(mm)	(mm)	(mm)
4” / 100	1.2	10	20/22.23
4 3/8” / 105	1.2	10	20/22.23
4.5” / 115	1.4	10	20/22.23
5” / 125	1.4	10	20/22.23
7” / 180	1.6	10	20/22.23
9”/ 230	1.8	10	20/22.23

Applications

This hot pressed turbo diamond blade is built for angle grinders and performs best on extra hard, dense materials where standard blades slow down or glaze over.

• Porcelain and hard ceramic tiles, including large-format floor and wall tiles
• Dekton, quartz and other dense engineered stone surfaces
• Marble and similar natural stone slabs and trims
• Detail cuts, notches and edge trimming where minimal chipping matters
• Dry cutting on site with a standard angle grinder
• Straight, controlled cuts in thin slabs and tiles thanks to the reinforced core

FAQ

What materials is this blade designed to cut?

It is intended for hard, dense materials such as porcelain, hard ceramics, quartz, Dekton and marble. It is not designed for cutting iron, steel or other metals.

Which machine does it fit?

The blade is designed for use on angle grinders. It is available in a range of diameters and arbor hole options — please refer to the specification table above for the exact dimensions of each item.

Why does it cut faster than a standard diamond blade?

The rim and core use a thin turbo-mesh design. This reduces the amount of material the blade has to push through, which supports fast cutting, cooler running and minimal chipping on hard surfaces.

Will the blade stay straight during deep or long cuts?

Yes. The reinforced inner core is designed to prevent flexing, which helps keep the cut straight and consistent, particularly in hard and dense materials.

How long will the blade last?

The hot pressed construction and thin turbo-mesh rim are made for extra long life on hard materials. Actual service life depends on the material being cut, the machine used and the operator's cutting technique.