Super Thin 4 105mm Turbo Diamond Saw Blade for Efficient Cutting of Ceramic Tiles and Porcelain

Hot pressed cutting blade designed for angle grinders   particularly for cutting hard material such as porcelain, hard ceramics and   quartz. Super fast cutting. Extra long life. Blade cuts extremely cool.     Thin turbo-mesh rim and core for fast cutting and minimal chipping.     Ideal for cutting extra hard ceramics, porcelain and other hard/dense   materials.     Reinforced inner core prevents flexing and provides straight cuts.
Diameter	Segment Width	Segment Height	Arbor Hole
(inch/mm)	(mm)	(mm)	(mm)
4” / 100	1.2	10	20/22.23
4 3/8” / 105	1.2	10	20/22.23
4.5” / 115	1.4	10	20/22.23
5” / 125	1.4	10	20/22.23
7” / 180	1.6	10	20/22.23
9”/ 230	1.8	10	20/22.23

Applications

This super thin turbo diamond saw blade is designed for angle grinders and is intended for fast, cool cutting of hard, dense materials.

• Porcelain tiles, including large-format and hard porcelain
• Hard ceramic tiles and ceramic wall and floor coverings
• Quartz surfaces and quartz-based materials
• Other hard, dense materials that require a thin, low-chipping cut
• Trim and finish cuts where minimal chipping along the cut edge matters
• General tile and ceramic work with angle grinders on site or in the workshop

FAQ

What materials is this blade designed to cut?

It is made for hard materials such as porcelain, hard ceramics and quartz, as well as other hard and dense materials. The thin turbo-mesh rim is intended for these demanding cuts rather than for general-purpose work.

What tool does this blade fit?

It is designed for use on angle grinders. The blade is supplied in a 4 inch / 105 mm diameter format, with the arbor hole size shown in the specification table.

Why is the blade described as super thin?

The thin turbo-mesh rim and core are designed for fast cutting with minimal chipping. This combination helps the blade cut extremely cool while keeping the cut line tight.

Will the blade stay straight during cutting?

Yes. The reinforced inner core is designed to prevent flexing, which helps the blade deliver straight cuts and maintain control in hard materials.

How is the blade manufactured?

It is a hot pressed cutting blade. The turbo-mesh rim is combined with a reinforced core to balance fast cutting with extra long life in hard ceramics, porcelain and similar dense materials.