Continuous Rim Saw Blade Cold Press for Efficient Cutting of Ceramic Tiles and Marble

Applications

This cold-pressed continuous rim diamond blade is built for clean, accurate cutting of ceramic tiles, marble and similar decorative materials, and fits standard angle grinders used in tile and stone work.

• Cutting ceramic floor and wall tiles, with a continuous rim that helps limit chipping along the cut edge
• Sizing marble tiles, slabs and trim pieces for flooring, wall cladding and decorative panels
• Porcelain and glazed tile work where a smooth, uniform cutting edge is required
• Countertop, vanity and sink cut-outs in tile and marble
• Trimming thresholds, sills, borders and mosaic inserts during installation
• Renovation and repair jobs where existing ceramic or marble surfaces must be cut out neatly

FAQ

What materials is this blade designed to cut?

It is made for ceramic tiles, marble, porcelain, glazed tiles and similar fragile decorative materials. It is not intended for cutting iron, steel or metal.

Why choose a continuous rim instead of a segmented blade?

The rim runs unbroken around the full circumference, so the diamond layer contacts the material continuously. On ceramic and marble this produces a smoother cut edge with less chipping than an interrupted segment design.

What does "cold press" mean for this blade?

The diamond rim is formed by cold pressing, which gives a dense, evenly distributed diamond layer and a strong bond between the cutting rim and the steel core.

What machine does it fit?

It is mounted on angle grinders and run at high speed, as with other diamond stone cutting blades. Check the blade diameter and arbor hole against your machine's spindle before fitting.

How can I get the best cutting result?

Secure the tile or marble so it cannot shift, let the grinder reach full speed before starting the cut, then move the blade steadily without forcing or twisting it. Inspect the blade before each use and replace it if it shows cracks or damage.