Diamond Saw Blade Double Side Cutting Disc for Marble Tile Stone Ceramics

Hot pressed cutting blade designed for angle grinders   particularly for cutting hard material such as porcelain, hard ceramics and   quartz. Super fast cutting. Extra long life. Blade cuts extremely cool.     Thin turbo-mesh rim and core for fast cutting and minimal chipping.     Ideal for cutting extra hard ceramics, porcelain and other hard/dense   materials.     Reinforced inner core prevents flexing and provides straight cuts.
Diameter	Segment Width	Segment Height	Arbor Hole
(inch/mm)	(mm)	(mm)	(mm)
4” / 100	1.2	10	20/22.23
4 3/8” / 105	1.2	10	20/22.23
4.5” / 115	1.4	10	20/22.23
5” / 125	1.4	10	20/22.23
7” / 180	1.6	10	20/22.23
9”/ 230	1.8	10	20/22.23

Applications

This hot pressed diamond saw blade is built for angle grinders and is intended for cutting hard, dense and fragile materials where chipping and heat build-up are a concern.

• Porcelain and hard ceramic tiles, including large-format and dense body tiles
• Quartz and other hard, dense countertop materials
• Marble slabs, trims and decorative pieces
• Natural stone and stone tile work
• Ceramic wall and floor tile installation, where clean edges and minimal chipping matter
• General tile and stone repair or renovation work with a hand-held angle grinder

The thin turbo-mesh rim keeps the cut fast and clean, while the reinforced inner core limits flexing so the blade tracks straight through the material.

FAQ

What materials is this blade designed to cut?

It is designed for hard and fragile materials such as porcelain, hard ceramics, quartz, marble and stone. It is a diamond blade for tile and stone work and is not intended for cutting iron, steel or other metal.

What tool does it fit?

The blade is designed for use on angle grinders. Check the arbor hole size against your grinder spindle, and confirm the diameter, segment width and segment height you need from the specification table above.

How does the thin turbo-mesh rim help?

The thin turbo-mesh rim and core are what allow the blade to cut fast while keeping chipping to a minimum, which is important when the visible edge of a tile or slab must stay clean.

Why does the blade cut cool?

The rim and core design is intended for extremely cool cutting, which helps limit heat damage to the material and supports the long blade life expected from this hot pressed construction.

Will the blade stay straight during a cut?

Yes. The reinforced inner core is designed to prevent flexing, which helps deliver straight cuts and consistent results in hard, dense materials such as porcelain and quartz.