Cold-Press Sintered Fine Teeth Turbo Blade Diamond Saw Blade

Diamond stone cutting saw blade are fixed in angle grinders with   high speed power.It could be used in block,concrete,pavers,brick and etc.And   the large diamond segments with cobalt provide an ideal combination for   cutting through even the toughest materials with exceptional accuracy.
Diameter	Segment Width	Segment Height	Arbor Hole
(Inch/mm)	(mm)	(mm)	(mm)
4″/105	1.7	5/7/10mm	22.23/20
4 3/8″/110	1.8	5/7/10mm	22.23/20
4.5″/115	1.8	5/7/10mm	22.23/20
5″/125	2	5/7/10mm	22.23/20
6″/150	2.1	5/7/10mm	22.23/20
7″/180	2.2	5/7/10mm	22.23/20
8″/200	2.4	5/7/10mm	22.23/20
9″/230	2.4	5/7/10mm	22.23/20
10″/250	2.6	5/7/10mm	25.4

Applications

With its cold-press sintered turbo rim and large diamond segments, this blade is made for fast cutting of hard building and stone materials when mounted on an angle grinder.

• Concrete blocks and concrete sections
• Brick and masonry walls
• Pavers and paving slabs
• Natural and artificial stone
• Kerbs, edging and general building slabs
• Repair, renovation and site cutting work where blocks or concrete must be trimmed to size

FAQ

What materials is this diamond saw blade designed for?

It is intended for stone-type building materials such as block, concrete, pavers, brick and similar hard materials. The large diamond segments with cobalt are combined to cut through even the toughest of these materials with exceptional accuracy. It is not designed for cutting iron, steel or other metals.

How is the blade fitted and used?

The blade is fixed in angle grinders and runs with high speed power, so it suits handheld cutting work on site as well as general fabrication and building jobs.

What does cold-press sintered mean for the cutting segments?

Cold pressing and sintering bond the diamond grit into the segment body. Combined with the cobalt content and the large segment size, this gives the blade a durable cutting edge for demanding building and stone materials.

What is the advantage of the fine teeth turbo rim?

The turbo rim carries fine teeth around the cutting edge while the body holds the large diamond segments. Together they support accurate, controlled cutting rather than a coarse, aggressive cut.

Which sizes and arbor holes are available?

Diameter, segment width, segment height and arbor hole are all listed in the specification table above. Please check the table to confirm the size and arbor that match your angle grinder before ordering.

Can it be used on metal?

No. This is a diamond blade for block, concrete, pavers, brick and similar stone-based materials. Do not use it on iron, steel or other metals.