165mm TCT Saw Blade for Wood Cutting - Carbide-Tipped Circular Saw Blade
| Parameter | Specification |
|---|---|
| Diameter | 165mm |
| Body Thickness | 2.0mm |
| Teeth Quantity | 20T |
| Center Hole Size | 25.4mm |
| Application | Wood cutting (soft/hard wood, particle board, etc.) |
Applications
A 165mm carbide-tipped circular saw blade is a general-purpose woodworking blade suited to both workshop and jobsite cutting tasks.
- Cross-cutting and ripping solid timber, including softwood and hardwood boards
- Sizing and trimming plywood, MDF, particleboard and other engineered wood panels
- Cutting laminate-faced or melamine-coated boards where a cleaner cut edge is required
- Trimming door skins, skirting, architraves, mouldings and other decorative wood trim
- General carpentry, framing, decking and furniture assembly work
- DIY and workshop use on portable circular saws that accept a 165mm blade
FAQ
What materials is this blade designed to cut?
It is a carbide-tipped (TCT) circular saw blade intended for wood and wood-based materials such as solid timber, plywood, MDF, particleboard and laminated panels. It is not designed for cutting metal, masonry, glass, tile or stone.
Why choose a carbide-tipped blade instead of a plain steel blade?
The tungsten carbide tips are brazed to the blade body, which keeps the cutting edges sharper for longer and helps maintain a cleaner cut when working through wood and panel products.
Will a 165mm blade fit my circular saw?
Fit depends on your machine. Check that your saw accepts a 165mm diameter blade, that the arbor bore matches the blade's bore, and that the blade's maximum rated speed is at least equal to your saw's no-load speed. Bore size and other specification details are listed in the product specification table above.
How should I store and look after the blade?
Keep the blade clean and free of resin or pitch build-up, store it flat or in its packaging so the tips are protected from impact, and handle it by the body rather than the teeth. Always disconnect the power before fitting or removing a blade and wear suitable eye and hearing protection while cutting.
Can this blade be used on other materials such as aluminium or plastic?
No. This blade is supplied for wood cutting only. Using it on materials it was not designed for can damage the blade and create a safety risk.
Low Breakage Risk
Solid steel wheel body reduces fracture, enhancing workplace safety.
Consistent Precision
Maintains original diameter for stable, accurate cuts throughout lifespan.
Low Dust Generation
Cleaner work environment, improved operation comfort and efficiency.
